For example, the 5GHz wireless adapter mode may not be enabled. The other possibility is that your computer’s network adapter settings are not configured correctly. Method 3: Enable the 802.11n Mode on Your Computer’s Wi-Fi Adapter If it doesn’t, you’ll need to go out and buy a new 5GHz-capable router.
Once you find it, check whether it supports 5GHz networks. You’ll be looking for a product with the same model name as your router. If your search is unsuccessful, the manufacturer’s official website might help. Alternatively, you could check whether compatibility information is printed on the box in which the router came. Most manufacturers will include that information somewhere in that document. To find out if your router supports the 5GHz bandwidth, you will have to do some research.įirst, check out your router’s instructions manual. Method 2: Check Whether Your Wi-Fi Router Supports the 5GHz Bandwidth However, if you see one of the first two network modes, you’ll need to get an updated network adapter that supports the 5GHz bandwidth.
It’s something to do with your settings, and you should be good to go as soon as you correct that.
If a network mode above is present that supports the 5GHz band, then this shows that the connection problem lies not in the network adapter of your device. 802.11n 802.11ax 802.11be: This shows your computer supports both 2.4GHz and 5GHz networks, as well as the 6GHz in the case of 802.11ax.802.11a 802.11ac: This shows that your computer is compatible only with 5GHz networks.802.11b 802.11g: This shows that your computer is compatible only with 2.4GHz networks.You’ll most likely see one of three possible network modes as follows:.Check the Radio types supported section.if you have the correct access levels, you should see the properties of your computer’s Wi-Fi Lan driver. Enter the following in the command prompt: netsh wlan show driversĪfter that, press Enter.
0 kommentar(er)
